Brother HL-2135W - Cleaning the Paper Pick-Up Roller

Routine Maintenance
94
4
i Open the front cover. Put the drum unit and toner cartridge assembly back into the machine.
j Put the paper tray firmly back in the machine.
k Close the front cover.
l Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn
on the machine's power switch.
Cleaning the paper pick-up roller 4
If the paper pick-up roller is dirty, the machine may not feed paper. In that case, clean the paper pick-up roller
as follows:
a Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC
power outlet.
b Pull the paper tray out of the machine.
c Remove all the paper, and anything that is stuck inside, from the paper tray.