C
Christina JonesAug 16, 2025
What to do if Brother HL-2170W says toner low?
- JJessica MasonAug 16, 2025
If your Brother Printer indicates that the toner is low, the suggested solution is replacing the toner cartridge.
To Next PageTo Next Page
What to do if Brother HL-2170W says toner low?
If your Brother Printer indicates that the toner is low, the suggested solution is replacing the toner cartridge.
What to do if Brother HL-2170W Printer says memory full?
If your Brother Printer displays a 'Memory full' error, you can try pressing the [Go] button to print the stored data. Alternatively, reduce the data capacity or lower the print resolution.
What to do if Brother HL-2170W says toner cartridge is at the end of life?
If your Brother Printer indicates that the toner cartridge is at the end of its life, the solution is to replace the toner cartridge.
Why my computer cannot find Brother Print Server?
If your computer can't find the Brother Print Server, it might be due to your computer's Firewall settings blocking the necessary network connection. To resolve this, try disabling the Firewall on your computer and then reinstall the drivers.
What to do if print job is not printed on Brother Print Server?
If your print job isn't printing, it could be due to a mismatched or duplicate IP address. Verify that the IP address is correctly loaded into the print server and ensure that no other devices on the network are using the same IP address.
What to do if Brother Print Server is not found during setup?
If the Brother Print Server isn't found during setup using the Brother installer application from the CD-ROM, ensure that the printer is powered on, is online, and ready to print.
What to do if Brother Printer has main PCB failure?
If your Brother Printer has a main PCB failure, the suggested solution is to replace the main PCB ASSY.
What to do if Brother Printer shows print overrun?
If your Brother Printer displays a 'Print overrun' error, try reducing the complexity of the data or reducing the print resolution.
Why is the wireless network connection sometimes disabled on Brother Print Server?
The wireless network connection status of your Brother Print Server can be affected by its environment and the presence of other wireless devices. Address any conditions that may be causing connection problems.
What to do if Brother HL-2170W says drum life end soon?
General| Color | No |
|---|---|
| N-up printing | 2, 4, 9, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 22 ppm |
| Internal memory | 32 MB |
| Sound power level (standby) | 27 dB |
| Sound pressure level (printing) | 51 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Media weight (tray 1) | 60-105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Network ready | Yes |
| Supported network protocols (IPv4) | IPv4: TCP/IP, ARP, RARP, BOOTP, DHCP, APIPA, WINS/NetBIOS, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Port 9100, IPP, FTP Server, POP before SMTP, SMTP AUTH, APOP, TELNET, SNMP, HTTP, TFTP, SMTP Client, ICMP. IPv6: TCP/IP, NDP, RA, DNS, LLMNR responder |
| Power requirements | AC 220V 50/60 Hz |
| Power consumption (active) | 460 W |
| Compatible operating systems | Windows Vista, XP(32 & 64 bit), Server 2003, 2000 Professional. Mac 10.2.4 - recenter, Linux |
| Non-operating relative humidity (non-condensing) | 20 - 80 % |
| Package weight | 8400 g |
| Sustainability certificates | ENERGY STAR |
| Power consumption (off) | 8 W |
| Power consumption (standby) | 80 W |
| Printer fonts | Bitmap, Scalable |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 361 x 170.5 mm |
|---|