Why does my Brother HL-2220 say 'Replace Drum'?
If your Brother printer is displaying 'Replace Drum', this indicates that it is time to replace the drum unit. It could also mean that the drum unit counter was not reset when a new drum was installed, so reset the drum unit counter.
How to fix 'Out of Memory' error on a Brother HL-2220 Printer?
If your Brother printer displays 'Out of Memory', it means the machine’s memory is full. You can press Start to copy the scanned pages (if a copy operation is in progress). Alternatively, press Stop/Exit, wait for other operations to finish, and then try again. Reducing the print resolution may also help.
What to do if my Brother HL-2220 Printer says 'Cover is Open'?
If your Brother printer displays 'Cover is Open', it means the front cover is not completely closed. Ensure that you close the front cover of the machine.
Why does my Brother HL-2220 say 'Cover is Open' when loading a document?
If your Brother printer displays 'Cover is Open' while loading a document, it means the ADF is open. Close the ADF cover of the machine, then press Stop/Exit.
What does 'Toner Ended' mean on my Brother Printer?
If your Brother printer displays 'Toner Ended', it's time to replace the toner cartridge with a new one.
How to resolve a 'No Toner' error on a Brother Printer?
If your Brother printer shows 'No Toner', the toner cartridge is not installed correctly. Pull out the drum unit, take out the toner cartridge, and then put it back into the drum unit.
What does 'Toner Low' mean on my Brother HL-2220 Printer?
If your Brother printer displays 'Toner Low', it means you will need to replace the toner cartridge soon. It is recommended to buy a new toner cartridge before you get a Replace Toner message.
What causes 'Document Jam' on Brother DCP-7065DN Printer?
If your Brother DCP-7065DN printer displays 'Document Jam', it means the document was not inserted or fed properly, or the document scanned from the ADF was too long.
What does 'Drum Stop' mean on my Brother HL-2220 Printer?
It is time to replace the drum unit.
What to do if my Brother Printer says 'No Paper'?
If your Brother printer displays 'No Paper', it means the printer is either out of paper or the paper isn't loaded correctly. Refill the paper tray and press Start, or remove the paper and load it again, then press Start. If the problem continues, the paper pick-up roller may need cleaning, so clean it.
General| Network ready | No |
|---|---|
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 21 ppm |
| Maximum duty cycle | 8000 pages per month |
| Number of print cartridges | 1 |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Maximum print size | - |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Standard interfaces | USB 2.0 |
| AC input voltage | 110 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 8 W |
| Power consumption (standby) | 62 W |
| Power consumption (printing) | 421 W |
| Operating temperature (T-T) | 10 - 32.5 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Mac compatibility | Yes |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 182 mm |
|---|
To Next Page
