Brother HL-2440 - T1 Solenoid

3-66
Confidential
8.28.2 T1 SOLENOID
(1) Remove the T1 solenoid lever spring from the Main body and T1 solenoid lever.
(2) Remove the Harness from the Guide part of the Main body.
(3) Remove the Taptite bind B M3x10 screw, and then remove the T1 solenoid from the
Main body.
(4) Remove the T1 solenoid lever from the T1 solenoid.
Fig. 3-61
T1 solenoid lever
T1 solenoid lever spring
T1 solenoid
Hook
Taptite bind B M3x10
Harness
Guide part
1
3
3
4
2