What to do if my Brother Projection TV is frozen and won't turn off?
If the TV functions on your Brother Projection TV do not respond to the remote control or to the front panel control and will not Power Off, use the System Reset button.
What to do if my Brother Projection TV won't turn on?
If your Brother Projection TV will not turn on after being plugged in, and the green light on the front panel is blinking, wait for at least one minute for the light to turn off, then press Power again.
Why isn't the V-Chip working on my Brother Projection TV?
If the V-Chip is not working on your Brother Projection TV, make sure that V-Chip is On. If V-Chip Hours are currently set to disable the V-Chip lock, the V-Chip will not block programming.
Why can't I see a picture when playing a VHS tape on my Brother Projection TV?
If you cannot see a picture when playing a VHS tape on your Brother Projection TV, display the Device Selection menu and select the correct VCR. Also, check your VCR’s owner’s guide for further troubleshooting.
How to fix Brother Projection TV remote control not working?
If the Brother Projection TV remote control is not working, first ensure the batteries are correctly installed and that the remote is set to “TV” mode. Try being no more than 20 feet from the TV. If it still doesn't work, you might need to program the remote control to operate the TV.
Why is the sound out of sync on my Brother Projection TV?
If the sound doesn't match the screen picture on your Brother Projection TV, it could be that NetCommand® is set up incorrectly, or the TV’s “Listen to:” setting may be set to SAP. If you're using stereo or A/V receiver speakers, check their input selection and ensure the AUDIO OUTPUT on the TV’s back panel is connected to the A/V receiver.
Why is there no picture in PIP on my Brother Projection TV?
If PIP does not display a picture on your Brother Projection TV, ensure that the V-Chip lock is off. Also, note that not all inputs can be displayed as a PIP.
What does a constant yellow status indicator light mean on my Brother Projection TV?
If the status indicator light on your Brother Projection TV is a constant yellow, the room temperature has exceeded proper levels. You need to cool the room.
What does a flashing yellow lamp indicator light mean on my Brother Projection TV?
If the lamp indicator light on your Brother Projection TV is flashing yellow, it indicates that the lamp cover door is open or the lamp cartridge is not secure.
What does a constant yellow lamp indicator light mean on my Brother Projection TV?
If the lamp indicator light on your Brother Projection TV is a constant yellow, it means the lamp may fail soon. It is recommended to purchase a new lamp.
General| Printer Type | Color Laser Printer |
|---|---|
| Print Speed (Black) | 20 ppm |
| Print Speed (Color) | 20 ppm |
| Print Resolution | 2400 x 600 dpi |
| Duplex Printing | Manual |
| Paper Input (Standard) | 250 sheets |
| Paper Capacity | 250 sheets |
| Connectivity | USB |
| Max Paper Size | A4 |
| Interface | USB |
To Next Page
