Printing Methods
3
Paper capacity of the paper trays 1
1
Folio size is 215.9 mm x 330.2 mm.
Recommended paper specifications 1
The following paper specifications are appropriate for this machine.
Use plain paper that is suitable for laser/LED machines to make copies.
Use paper that is 75 to 90 gsm.
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
(Before you put paper in this machine, see Important information for choosing your paper on page 193.)
Paper size Paper types No. of sheets
Paper Tray
(Tray 1)
A4, Letter, Legal, B5 (JIS),
Executive, A5,
A5 (Long Edge), A6, Folio
1
Plain paper, Thin paper and
Recycled paper
up to 250 sheets
(80 gsm)
Manual feed slot Width:
76.2 to 216 mm
Length:
116 to 355.6 mm
Plain paper, Thin paper,
Thick paper, Thicker paper,
Bond paper, Recycled paper,
Envelopes, Labels and
Glossy Paper
1 sheet
1 Envelope
Basis weight 75-90 gsm
Thickness 80-110 μm
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%
To Next Page
Loading...
Need help?
General
