12
Installing the Driver
1. Installing the Driver and Connecting the Printer to Your PC
1
Make sure the USB interface cable is NOT
connected to the printer, and then begin
installing the driver. If you have already
connected the cable, remove it.
2
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
3
Select the USB interface.
(HL-5030 users will not see this screen.)
4
Click the Install button.
5
Click the Next button.
Follow the on-screen instructions.
For USB Interface Cable Users
If the Found New Hardware Wizard
appears on your PC, click the Cancel
button.
A
N
C
E
Step 2
To Next Page
Loading...
