Brother HL-5040 - Connecting the Printer to Your Macintosh & Installing the Driver; For Mac os X 10.1 to 10.2 Users

20
Installing the Driver
Connecting the Printer to your Macintosh & Installing the Driver
1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Make sure the printer power switch is on.
3
Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
4
Click the Install button, and follow the
on-screen instructions.
5
Select Applications from the Go menu.
6
Open the Utilities folder.
7
Open the Print Center icon.
For USB Interface Cable Users
For Mac
®
OS X 10.1 to 10.2 Users
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Continue to
the next page
Step 2