CHAPTER 10 CARBON COPY FUNCTION - 3
1. OUTLINE
1.1. Outline of the function
This function allows you to print two or more copies of the one page data on the printer side. The function also
allows you to select the paper tray and register an additional macro for each copy. Therefore it is possible to
change the printing format for each copy by selecting the paper tray to change the paper type or registering
different macros.
The main purpose of this function is to support the carbon copy printing on the laser printer, which has been
provided on the dot printer.
This function is supported on the HL-
6050/6050D/6050DN/5270DN/5280DW/5380DN/L5000D/L5580D/L5100DN/L5200DW/L6200DW/L6300D
W/L6400DW printers.
To Next Page
Loading...
