Brother HL-5470DW

99
Options
4
SO-DIMM 4
The machine has 128 MB of standard memory and one slot for optional memory expansion. You can increase
the memory up to a maximum of 384 MB by installing one SO-DIMM (Small Outline Dual In-line Memory
Module).
SO-DIMM types 4
You can install the following SO-DIMMs:
 256 MB Kingston KTH-LJ2015/256
 256 MB Transcend TS256MHP423A
Note
• For more information, visit the Kingston Technology's website at http://www.kingston.com/.
• For more information, visit the Transcend website at http://www.transcend.com.tw/
.
In general, the SO-DIMM must have the following specifications:
Type: 144-pin and 16-bit output
CAS latency: 4
Clock frequency: 267 MHz (533 Mb/s/pin) or more
Capacity: 256 MB
Height: 30.0 mm (1.18 in.)
DRAM type: DDR2 SDRAM
Note
• There might be some SO-DIMMs that will not work with the machine.
• For more information, call the dealer you bought the machine from or Brother Customer Service.