80
General Information
General Setup 3
Submenu Menu Selections Options Descriptions
Local Language - English* / Français... Changes the LCD language for your
country.
Resolution - 300 / 600* / HQ1200 / 1200 Chooses a print resolution 300, 600,
or 1200 dots per inch, or HQ1200
(2400×600 dpi).
Density - -6 / ... / -1 / 0* / 1 / ... / 6 Increases or Decreases the print
density.
Ecology Sleep Time 0 / 1 / 2 / 3* / 4 / 5 / ... Min Sets the time to return to Power
Save mode.
Toner Save On / Off* Increases the page yield of the toner
cartridge.
Auto Powerdown
(Middle East and
Africa only)
On / Off* Enables or disables Power Down
mode.
Quiet Mode - On / Off* Decreases printing noise.
Panel Control Button Repeat 0.1* / 0.4 / 0.6 / 0.8 /
1.0 / 1.4 / 1.8 / 2.0 Sec
Sets the time for the LCD message
to change when holding a or b at
intervals.
Message
Scroll level1* / level2 / ... /
Level10
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On* / Off Sets the machine to automatically
return to Ready mode.
Setting Lock - - Turns the lock panel settings On or
Off using the password.
Reprint - On / Off* Turns the reprint settings On or Off.
Interface Select Auto* / USB / Network Chooses the interface you use.
If you choose Auto, the machine
automatically changes the interface
to USB or Ethernet depending on
which interface is receiving data.
Auto IF Time 1 / 2 / 3 / 4 / 5* / ... / 99Sec You need to set the time-out period
for the auto interface selection.
Input Buffer Level 1 / 2 / 3 / 4* / ... / 7 Increases or decreases the input
buffer capacity.
Delete Storage Macro ID (ROM) - Deletes the data in the ROM.
Font ID (ROM) -
Format (ROM) - Formats the ROM.
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
