What to do if my Brother Printer displays SIZE ERROR DX?
If your Brother printer displays 'SIZE ERROR DX', you can only use A4, Letter and Legal size for duplex printing. Check the printer driver setting and put the correct sized paper in the paper tray or multi-purpose tray that is selected in the printer driver.
What to do if my Brother HL-6050 says NO PAPER?
If your Brother printer displays a 'NO PAPER' message, put paper in the empty tray.
Why is my Brother Printer not printing?
If your Brother printer is not printing, ensure that the cable is correctly connected to the printer and that you have selected the appropriate printer driver.
What to do if my Brother HL-6050 Printer says MEMORY FULL?
If your Brother printer displays 'MEMORY FULL', add more memory.
What to do if my Brother HL-6050 Printer displays PRINT OVERRUN?
If your Brother printer displays 'PRINT OVERRUN', reduce the resolution or add the optional memory. Set Page Protection to the correct size.
What to do if my Brother HL-6050 displays STORAGE FULL?
If your Brother printer displays 'STORAGE FULL', delete unnecessary macros or fonts, or replace the CompactFlashTM card or HDD with a new one.
What to do if my Brother Printer shows CARD ERROR?
If your Brother printer displays a 'CARD ERROR' message, make sure the CompactFlashTM card is installed properly and formatted correctly. Turn the printer off, wait a few seconds, then turn it on again. If the error persists, replace the CompactFlashTM card with a new one.
What to do if my Brother HL-6050 Printer shows DIMM ERROR?
If your Brother printer displays a 'DIMM ERROR' message, re-install the DIMM correctly. Turn off the printer, wait a few seconds, and then turn it on again. If the error persists, replace the DIMM with a new one.
What to do if my Brother HL-6050 Printer says SIZE MISMATCH?
If your Brother printer displays 'SIZE MISMATCH', put the same size paper in the paper tray or multi-purpose tray that is selected in the printer driver, and then press Go.
What to do if my Brother HL-6050 Printer says BACK TRAY OPEN?
If your Brother printer displays 'BACK TRAY OPEN', close the back output tray located at the back of the printer.
General| Color | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 11 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Maximum print size | 210 x 297 mm |
| Media weight (tray 1) | 60 - 105 g/m2 |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 161 g/m² |
| Processor model | Aurora SPARClite |
| Built-in processor | Yes |
| Maximum internal memory | 160 MB |
| Sound power level (standby) | 39 dB |
| Sound pressure level (printing) | 52 dB |
| Compatibility | PC & Mac |
| Compatible operating systems | Windows 95/98/Me/NT4.0/2000, XP, Vista Mac OS8.6-9.2, OSX 10.1-10.2 Linux |
| Maximum input capacity | 500 sheets |
| Power consumption (off) | 8 W |
| Power consumption (standby) | 110 W |
| Power consumption (printing) | 600 W |
| Number of print cartridges | 1 |
Weight and Dimensions| Dimensions (WxDxH) | 400 x 425 x 310 mm |
|---|
To Next Page
