J
John GoodwinSep 7, 2025
What to do if my Brother Printer shows DOWNLOAD FULL?
- JjanicemarshallSep 7, 2025
If your Brother printer displays a 'DOWNLOAD FULL' message, add more memory.
To Next PageTo Next PageWhat to do if my Brother Printer shows DOWNLOAD FULL?
If your Brother printer displays a 'DOWNLOAD FULL' message, add more memory.
What to do if my Brother HL-6050 Printer shows DIMM ERROR?
If your Brother printer displays a 'DIMM ERROR' message, re-install the DIMM correctly. Turn off the printer, wait a few seconds, and then turn it on again. If the error persists, replace the DIMM with a new one.
What to do if my Brother Printer shows CARD ERROR?
If your Brother printer displays a 'CARD ERROR' message, make sure the CompactFlashTM card is installed properly and formatted correctly. Turn the printer off, wait a few seconds, then turn it on again. If the error persists, replace the CompactFlashTM card with a new one.
What to do if my Brother Printer displays CHECK NET BOARD?
If your Brother printer displays 'CHECK NET BOARD', the installed network board is not compatible. Please install the recommended network board.
What to do if my Brother HL-6050 says FUSER COVER OPEN?
If your Brother printer displays 'FUSER COVER OPEN', close the jam clear cover located behind the back output tray at the back of the printer.
What to do if my Brother HL-6050 Printer shows TONER LOW?
If your Brother Printer displays a 'TONER LOW' message, it means you should purchase a new toner cartridge. Have the new cartridge ready, so you can replace the old one when you receive a 'TONER LIFE END' message.
What to do if my Brother Printer says BACK TRAY CLOSED?
If your Brother printer displays 'BACK TRAY CLOSED', open the back output tray. Push down the two blue levers, and then press Go.
What to do if my Brother Printer shows CARTRIDGE ERROR?
If your Brother printer displays a 'CARTRIDGE ERROR' message, take out the toner cartridge and put it back into the printer again.
What to do if my Brother HL-6050 Printer says SIZE MISMATCH?
If your Brother printer displays 'SIZE MISMATCH', put the same size paper in the paper tray or multi-purpose tray that is selected in the printer driver, and then press Go.
What to do if my Brother HL-6050 displays NO TRAY?
If your Brother printer displays a 'NO TRAY' message, put the paper tray in the printer.
General| Color | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 11 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Maximum print size | 210 x 297 mm |
| Media weight (tray 1) | 60 - 105 g/m2 |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 161 g/m² |
| Processor model | Aurora SPARClite |
| Built-in processor | Yes |
| Maximum internal memory | 160 MB |
| Sound power level (standby) | 39 dB |
| Sound pressure level (printing) | 52 dB |
| Compatibility | PC & Mac |
| Compatible operating systems | Windows 95/98/Me/NT4.0/2000, XP, Vista Mac OS8.6-9.2, OSX 10.1-10.2 Linux |
| Maximum input capacity | 500 sheets |
| Power consumption (off) | 8 W |
| Power consumption (standby) | 110 W |
| Power consumption (printing) | 600 W |
| Number of print cartridges | 1 |
Weight and Dimensions| Dimensions (WxDxH) | 400 x 425 x 310 mm |
|---|
