APPENDIXES A - 18
2
Pull out the power cord from the AC power outlet/socket
and then the printer.
3
Loosen the screws at both ends of the bottom of the
duplex unit.
4
While supporting the duplex unit with your hand, lift the
lever at the top left hand side of the duplex unit to unlock
it and then tilt the top part of the duplex unit away from the
printer.
You must support the duplex unit with your hand, when it is
unlocked. If you do not, it may fall.
5
While holding up the duplex unit, remove the right and left
tabs of the duplex unit from the holes at the back of the
printer.
To Next Page
Loading...
