Brother HL-8050N - Offset Catch Tray (CT-8000; Installing the Offset Catch Tray

APPENDIXES A - 20
Offset Catch Tray (CT-8000)
You can install an optional offset catch tray to this printer.
Be sure to switch off the power and unplug the power cord from the AC power outlet/socket before
carrying out the operations. If you do not, you might get an electrical shock.
Installing the Offset Catch Tray
1 Turn off the printer power switch.
2 Pull out the power cord from the AC power outlet/socket
and then the printer.
3 Open the back cover by lifting the lower gray lever at the
top left corner of the back of the printer.
Do not touch any parts inside the printer.
WARNING