Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For
IEEE 802.11b/g/n)
• Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
You must connect to a new SSID from your computer when it is configured for Ad-Hoc mode.
• Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured SSID,
use these instructions.
102
To Next Page
Loading...
