Brother HL-L9200CDWT - Page 109

General Information
100
3
Network
(Continued)
WLAN
(Continued)
WPS w/ PIN
Code
- - Configures the
wireless network
settings using
WPS with a PIN
code.
WLAN Status Status
Active(11n) /
Active(11b) /
Active(11g) / Wired
LAN Active / WLAN
OFF / AOSS Active /
Connection Failed
Displays wireless
Ethernet link
status.
Signal - Displays the
signal condition.
SSID - Displays SSID
[uses a maximum
of 32 digits and
characters 0-9,
a-z and A-Z in
ASCII values]
Comm. Mode
Ad-hoc /
Infrastructure
Displays the
current
Communication
Mode.
MAC Address - - Displays MAC
address of the
machine.
Set to
Default
Restores wireless network settings of the internal print server to
the factory settings.
WLAN Enable -
On / Off*
Turns the wireless
interface on or off.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
The factory settings are shown in Bold with an asterisk.