General Information
101
3
Network
(Continued)
Wi-Fi Direct Push Button - - You can easily
configure your
Wi-Fi Direct™
network settings
using the one-
button push
method.
PIN Code - - You can easily
configure your
Wi-Fi Direct™
network settings
using WPS with a
PIN code.
Manual - - You can manually
configure your
Wi-Fi Direct™
network settings.
Group Owner -
On / Off
Sets your machine
as the Group
Owner.
Device Info. Device Name - You can see the
device name of
your machine.
SSID - Displays SSID of
Group Owner.
When the
machine is not
connected, the
Touchscreen
displays Not
Connected.
IP Address - Displays the IP
Address of your
machine.
Status Info. Status
G/O Active(**) /
Client Active / Not
Connected / Off /
Wired LAN Active
** = the number of
devices
Displays the Wi-Fi
Direct™ network
status.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
