To Next PageTo Next PageWhy is dialing not working on my Brother IntelliFAX 885MC?
If dialing does not work on your Brother Fax Machine, check all line cord connections, and make sure the curled handset cord is not in the EXT jack. Check power cord connection. Send a manual fax by pressing Speaker Phone or by lifting the handset and dialing the number. Wait to hear fax receiving tones before pressing Fax Start.
What to do if my Brother Fax Machine says 'CHECK PAPER RELOAD PAPER'?
If your Brother Fax Machine displays 'CHECK PAPER RELOAD PAPER', it means the machine is out of paper or the paper is not properly loaded in the paper tray. Refill the paper or remove the paper and load it again. If this error appears while receiving a fax, load paper to restart printing. If you were coping or printing reports, load paper and try again.
What to do if my Brother IntelliFAX 885MC says 'OUT OF MEMORY ERASE MESSAGE'?
If your Brother Fax Machine displays 'OUT OF MEMORY ERASE MESSAGE', it means the memory capacity has been exceeded. Print the faxes stored in memory to delete them and then try again.
Why does my Brother Fax Machine Transmission Verification Report print 'Result: NG'?
If the Transmission Verification Report prints “Result: NG” on your Brother Fax Machine, there is probably temporary noise or static on the phone line. Try sending the fax again. If the problem continues, call the telephone company to check your phone line.
What does 'COMM.ERROR' mean on my Brother Fax Machine and how to fix it?
If your Brother Fax Machine displays 'COMM.ERROR', a poor quality phone line resulted in a communications error. Try the call again.
How to improve poor transmitting quality on Brother Fax Machine?
To solve poor transmitting quality on your Brother Fax Machine, try changing your resolution to FINE or S. FINE. Make a copy to verify the fax machine’s scanner operation.
What to do if my Brother Fax Machine says 'OUT OF MEMORY SEND:PRESS START OUT OF MEMORY QUIT:PRESS STOP'?
If your Brother Fax Machine displays 'OUT OF MEMORY SEND:PRESS START OUT OF MEMORY QUIT:PRESS STOP', there is not enough memory available to send your fax. Press Stop/Exit. Print the faxes stored in memory to delete them. Then try again.
What to do if my Brother Fax Machine says 'OUT OF MEMORY PRINT:PRESS COPY OUT OF MEMORY QUIT:PRESS STOP'?
If your Brother Fax Machine displays 'OUT OF MEMORY PRINT:PRESS COPY OUT OF MEMORY QUIT:PRESS STOP', there is not enough memory available to perform your copy operation. Press Stop/Exit. Print the faxes stored in memory to delete them. Then try again.
How to fix 'CHECK CARTRIDGE RESET OR REPLACE' error on Brother IntelliFAX 885MC?
If your Brother Fax Machine displays 'CHECK CARTRIDGE RESET OR REPLACE', the machine is out of ribbon or the print cartridge is not properly installed. Install the print cartridge again.
How to remove vertical black lines when sending faxes from Brother IntelliFAX 885MC Fax Machine?
If you see vertical black lines when sending faxes from your Brother Fax Machine, use your fax machine to make a copy. If the copy shows the same problem, the scanner area is dirty. Lift the top cover and check the original path. Clean the scanner’s white tape and the glass strip under the tape using isopropyl alcohol and a lint-free cloth.
General| Type | Plain Paper Fax |
|---|---|
| Modem Speed | 14.4 Kbps |
| Paper Capacity | 250 sheets |
| Compatibility | Windows, Mac |
| Transmission Speed | 6 seconds per page |
| Automatic Document Feeder (ADF) | Yes |
| Connectivity | Parallel |
