To Next PageTo Next Page
What to do if the thread wiper doesn't operate correctly on my Brother KE-430F Sewing Machine?
If the thread wiper on your Brother Sewing Machine isn't operating correctly: * It might be obstructing the needle, so adjust the height of the thread wiper. * Adjust the operating distance of the thread wiper. * The thread wiper position may be incorrect, so adjust the operating distance of the thread wiper.
What to do if the work clamp does not rise on my Brother Sewing Machine KE-430F?
If the work clamp on your Brother Sewing Machine (KE-430F) does not rise, it could be due to: * Sluggish work clamp operation – grease the sliding part of the work clamp. * Too much friction between the work clamp lifter plate and work clamp arm lever plate – grease these parts. * The work clamp contacting the thread wiper – adjust the position of the thread wiper.
What to do if the button clamp does not rise on my Brother KE-430F Sewing Machine BE-438F?
If the button clamp on your Brother Sewing Machine (BE-438F) does not rise, it might be because the work clamp is contacting the thread wiper. Adjust the position of the thread wiper to resolve this.
General| Type | Electronic Sewing Machine |
|---|---|
| Bobbin Winding | Automatic |
| Feed System | Drop Feed |
| Stitch Type | Decorative |
| Stitch Length | 5 mm |
| Stitch Width | 7 mm |
| Presser Foot Lift | Adjustable |
| Bobbin | Drop-in |
| Thread Tension | Adjustable |
| Power Requirements | AC 100-120V, 50/60Hz |
