Brother KE-430F - 3 Relationship between Programs and Patterns

3. RELATIONSHIP BETWEEN PROGRAMS AND PATTERNS
3
KE-430F, BE-438F
3. RELATIONSHIP BETWEEN PROGRAMS AND
PATTERNS
Programs specify the way that patterns (stitches) are to be sewn (parameters).
<Programming method>
1. Use a standard pattern which has been registered in the actual sewing machine (430F: No. 1 to 89, 438F: 1 to 64) *
2
,
and save the pattern that you want to sew into that program number.
2. Set the parameters (such as X-scale, Y-scale, sewing speed and upper thread tension). This completes the program.
* When actually sewing, select the program number and then start sewing.
*1 Depending on the memory switch settings, the height of the work clamp/button clamp can also be set by means of
parameters.
*2 The PS300B can be used to create patterns and load them into actual sewing machines.
2590B
Pattern
Program
Parameter
X-scale
Y-scale
Sewing speed
Slow start pattern
Upper thread tension
etc. *
1