Brother KE-435C User Manual (English)

Other manuals for Brother KE-435C

Questions and Answers:

M
Ms. Michelle Gonzales MDSep 14, 2025
How to fix Brother KE-435C Sewing Machine when upper thread is not trimmed?
- G
  Gina WellsSep 14, 2025
  If the upper thread is not being trimmed, it could be due to: * A blunt movable knife; replace it. * A blunt fixed knife; sharpen or replace it. * The movable knife not picking up the thread; adjust the position of the shuttle race thread guide. * Skipped stitches at the sewing end preventing the movable knife from picking up the thread; refer to “Skipped stitches occur”. * An incorrect movable knife position; adjust it. * Sub-tension being too weak; turn the sub-tension nut to adjust the tension.
J
Jason KrauseAug 25, 2025
What to do if my Brother KE-435C is skipping stitches?
- P
  phillip84Aug 25, 2025
  If your Brother Sewing Machine is skipping stitches, it could be due to: * Too much clearance between the needle and rotary hook tip - adjust the needle clearance. * Incorrect needle and rotary hook timing - adjust the needle bar lift amount. * The driver contacting the needle too much - adjust the driver needle guard. * A bent needle - replace the needle. * The needle being installed incorrectly - install the needle correctly.
V
Victoria HawkinsAug 25, 2025
Why is my Brother KE-435C Sewing Machine upper thread breaking?
- R
  rhartAug 26, 2025
  There are several reasons why the upper thread might be breaking: * The upper thread tension may be too strong, so you should adjust it. * The needle might be installed incorrectly; make sure it is installed correctly. * The thread might be too thick for the needle; use the correct thread for the needle. * The thread take-up spring tension and height could be incorrect; adjust them. * The rotary hook, needle hole plate, or needle might be damaged; file smooth or replace the part. * If using synthetic thread, it might be melting; use a thread cooling device.
R
Ronald WeeksAug 26, 2025
What to do if my Brother KE-435C Sewing Machine skips stitches?
- E
  ellismarkAug 27, 2025
  Skipped stitches can occur for several reasons: 1. The clearance between the needle and rotary hook tip might be too great; adjust the needle clearance. 2. The needle and rotary hook timing could be incorrect; adjust the needle bar lift amount. 3. The driver might be contacting the needle too much (except KE-484C); adjust the driver needle guard. 4. The needle could be bent; replace it. 5. The needle might be installed incorrectly; install it correctly. 6. The needle thread might be too short; adjust the thread take-up lever stroke.
T
Tammy PattersonAug 27, 2025
How to fix Brother Sewing Machine when needle breaks?
- M
  Michael RamseyAug 27, 2025
  A needle can break for the following reasons: * The needle is touching the rotary hook; adjust the needle clearance. * The needle is bent; replace the needle. * The needle is too thin; use the correct needle for the material. * The needle is striking the button; refer to “6. CHECKING THE SEWING PATTERN” in the Instruction Manual.
B
brooksthomasSep 9, 2025
How to fix a Brother Sewing Machine when the thread wiper does not operate correctly?
- P
  Paul WolfeSep 9, 2025
  If the thread wiper on your Brother Sewing Machine isn't operating correctly: * The thread wiper may be obstructing the needle - adjust the height of the thread wiper. * The thread wiper position may need adjusting - adjust the operating distance of the thread wiper. * The thread wiper position may be incorrect - adjust the operating distance of the thread wiper.
J
Jon AndersonSep 8, 2025
Why is the upper thread not trimming on my Brother KE-435C Sewing Machine?
- M
  Michael SpearsSep 8, 2025
  The upper thread may not be trimming on your Brother Sewing Machine because: * The movable knife is blunt - replace it. * The fixed knife is blunt - sharpen or replace it. * The movable knife does not pick up the thread - adjust the position of the shuttle race thread guide. * The movable knife does not pick up the thread because of skipped stitches at the sewing end - refer to “Skipped stitches occur”. * The movable knife position is incorrect - adjust the position of the movable knife. * The sub-tension is too weak - turn the sub-tension nut to adjust the tension.
S
Shannon PattersonSep 8, 2025
What to do if the work clamp does not rise on my Brother Sewing Machine?
- V
  Victoria KingSep 9, 2025
  If the work clamp on your Brother Sewing Machine does not rise, it could be due to: * Sluggish work clamp operation - grease the sliding part of the work clamp. * The work clamp lift amount being too great - adjust the height of the work clamp to within 17 mm (25 mm). * Too much friction between the presser plate and presser arm lever support - grease them. * The work clamp contacting the thread wiper - adjust the position of the thread wiper.
M
Mark BakerSep 2, 2025
Why is my Brother Sewing Machine lower thread breaking?
- G
  glenda48Sep 2, 2025
  The lower thread may break because: * The lower thread tension is too strong, so adjust the lower thread tension. * The corners of the needle hole plate or bobbin case are damaged; file smooth or replace the affected part.
L
leslie58Aug 31, 2025
How to adjust incorrect thread tightness on a Brother KE-435C?
- J
  Jonathan KiddAug 31, 2025
  Incorrect thread tightness on your Brother Sewing Machine can be fixed by: * Adjusting the upper thread tension if it is too weak. * Adjusting the lower thread tension if it is too weak. * Adjusting the tension and height of the thread take-up spring if they are incorrect.