Brother KE-436C - Machine Parts Identification; Parts Diagram and List

KE-436C 7/8
2003.1
Gauge parts list
Optional gauges are listed in the following table.
Each work clamp pair is used in combination with the feed plate directly below them.
For one-touch work clamp assy
L S44941-001 (434E SF)
R S44940-001 (434E SF)
Work clamp
S43990-001 (A) S43991-001 (B)
S43992-
001 (C)
Feed plate
A: t = 0.5
B: t = 1.0
C: t = 2.0
Gauge assy, 434E MK2
S54984-001
Home position standard plate
S52100-001
Screw, w/socket SM4.37
S49955-001