Installing the Driver & Software
20
STEP2
Macintosh
®
Macintosh
®
USB
6 Turn on your Macintosh
®
.
7 Put the supplied CD-ROM into your CD-ROM
drive.
8 Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, the
computer will restart automatically.
9 The Brother software will search for the Brother
device. During this time the following screen
will appear.
10 When this screen appears, click OK.
For Mac OS
®
X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 15.
11 For Mac OS
®
X 10.2.4 to 10.2.8 users:
Click Add.
12 Choose USB.
13 Choose MFC-XXXX (where XXXX is your
model name), and then click Add.
14 Click Print Center, then Quit Print Center.
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
To Next Page
Loading...
