Setting Up the Machine
7
4 Connecting the power cord
1 Connect the power cord.
5 Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1 Make sure that the power is turned on.
The LCD shows:
No Cartridge
2 Open the ink cartridge cover (1).
3 Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
4 Take out the ink cartridge.
5 Carefully remove the protective yellow cap (1).
1
1
1
To Next Page
Loading...
