Brother MFC-1811 - On-Screen Programming for DCP

Chapter 1
24
2.Ecology 1.Toner Save You can save toner
using this feature.
On Increases the page
yield of the toner
cartridge. When you
set Toner Save to
On, print appears
lighter.
Off*
2.Auto Power
Off
If the machine is in
Deep Sleep mode for
several hours, it will
go into Power Off
mode automatically.
To disable the Power
Off mode, press and
hold .
Off*
1 hour
2 hours
4 hours
8 hours
29
3.LCD
Contrast
— Adjusts the contrast
of the LCD.
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press a to make the
LCD darker, or press
b to make the LCD
lighter.
4.Replace
Toner
— Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Continue The machine will
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
29
Stop* The machine will stop
printing. Replace the
toner cartridge with a
new one.
5.Reset 1.All
Settings
Restores all the
machine settings to
factory default.
a Reset
b Exit Cancel restore and
exit the menu.
1.General Setup (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.