Troubleshooting and other information
71
A
Document Jams
(MFC-1810, MFC-1811
and MFC-1815)
A
Follow the steps below to handle a document
jam in the ADF.
a Open the ADF cover.
b Pull the jammed document out.
c Close the ADF cover.
d Lift the document cover.
e Pull the jammed document out to the
right.
f Insert a piece of stiff paper, such as
cardstock, into the ADF to push any
small paper scraps through.
If the document rips or tears, be sure
you remove all small paper scraps to
prevent future jams.
g Close the document cover.
h Press Stop/Exit.
To Next Page
Loading...
Need help?
General