38
Macintosh
Wireless Network
Install the drivers & software (Mac OS X 10.4.11, 10.5.x, 10.6.x)
19
Before you install
a Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
20
Install MFL-Pro Suite
a Put the supplied CD-ROM into your CD-ROM
drive.
b Double-click the Start Here OSX icon to install.
c Choose Wireless Network Connection, and
then click Next.
d Click on the Wireless settings checked and
confirmed check box, and then click Next.
Follow the on-screen instructions.
e Please wait, it will take a few seconds for the
software to install. After the installation, this
window will appear.
Choose your machine from the list, and then
click OK.
f When this screen appears, click Next.
g When the Brother Support screen appears,
click Close to finish the installation or go to
step 21.
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/
.
• For Mac OS X 10.4.0 to 10.4.10 users,
upgrade to Mac OS X 10.4.11 - 10.6.x.
If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long and click
OK. Go to f.
The name you enter will appear on the machine’s
LCD when you press the Scan key and choose a
scan option. (For more information, see Network
Scanning (For models with built-in network
support) in the Software User’s Guide on the
CD-ROM.)
To Next Page
Loading...
