Brother MFC-660CN - Changing Speed-Dial Names or Numbers

Dialling and storing numbers
59
8
f Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 156.)
 To store the number without a name,
press OK.
g Press OK to confirm the fax or
telephone number.
h Do one of the following:
 Enter the second fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
i Press Stop/Exit.
Changing Speed-Dial names
or numbers 8
You can change a Speed-Dial name or
number that has already been stored.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Set Quick-Dial.
Press OK.
d Press a or b to choose Speed-Dial.
Press OK.
e Press a or b to choose the 2-digit
Speed-Dial location you want to change.
Press OK.
f Do one of the following:
 Press a or b to choose Change.
Press OK.
 Press a or b to choose Delete.
Press OK.
Press 1 to confirm and press
Stop/Exit.
Note
How to change the stored name or
number:
If you want to change a character, press d
or c to position the cursor under the
character you want to change, and then
press Clear/Back. Re-enter the
character.
g Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(See Entering Text on page 156.)
 If you do not want to change the
name, press OK.
h Do one of the following:
 Enter the new fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to change the
number, press OK.
i Do one of the following:
 Enter the second new fax or
telephone number (up to 20 digits).
Press OK.
 If you do not want to change the
number, press OK.
j Press Stop/Exit.