Brother MFC 6890CDW - Set the Date and Time; Set the Lcd Contrast

9
8
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press MENU.
b Press a or b to display General Setup.
c Press General Setup.
d Press a or b to display LCD Settings.
e Press LCD Settings.
f Press LCD Contrast.
g Press Light, Med or Dark.
h Press Stop/Exit.
9
Set the date and time
The machine displays the time, and if you set up the
station ID the date and time will be added to each fax
you send.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Date&Time.
e Enter the last two digits of the year on the
Touchscreen, and then press OK.
(e.g. Enter 0 9 for 2009.)
f Enter the two digits for the month on the
Touchscreen, and then press OK.
(e.g. Enter 0 3 for March.)
g Enter the two digits for the day on the
Touchscreen, and then press OK.
(e.g. Enter 0 1 for the first day of the month.)
Note
You can also adjust the angle of the display by
lifting it.
Year:2009
Year: 2 009
Date&Time
Dat e &Time
Month:03
Mon t h:03
Date&Time
Dat e &Time
Day:01
Day : 01
Date&Time
Dat e &Time