28
For Wireless Network Users
n Click Next. The settings will be sent to your
machine.
o
A connection result message appears for 60
seconds on the LCD.
p Disconnect the USB cable between the
computer and the machine.
To install MFL-Pro Suite, continue to
step f on page 36.
page 36
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry and try starting from step k again.
Wireless setup is now complete. A four
level indicator at the right of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To Next Page
Loading...
