Confidential
5-21
Preparation
Prior to proceeding with the disassembly procedure,
(1) Unplug
- the modular jack of the telephone line,
- the USB cable, if connected (not shown below), and
- the modular jack of the external telephone set if connected (not shown below).
How to Access the Object Component
- On the next page is a disassembly flowchart which helps you access the object components.
To remove the scanner motor FB, for example, first find it on the flowchart and note
its number (5.1.52 in this case). To access it, you need to remove all the parts above
the fixing unit on the flowchart (5.1.46, 5.1.47, 5.1.48 and 5.1.50 in this case) before the
unit itself can be removed.
- Unless otherwise specified, all parts should be replaced in the reverse order to which they
were removed to reassemble the machine.
To Next Page
Loading...
