Brother MFC-8460N - Setting up the Machine; Install the Drum Unit Assembly

4
Setting Up the machine
Do not connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1
Open the front cover by pressing the front
cover (1) release button.
2
Unpack the drum unit and toner cartridge
assembly.
3
Gently rock it from side to side several times
to distribute the toner evenly inside the
assembly.
4
Put the drum unit assembly into the
machine until it clicks into place.
5
Close the front cover of the machine.
1 Install the Drum Unit Assembly
(1)
Step 1