EasyManuals Logo

Brother MFC-8480DN User Manual

Brother MFC-8480DN
241 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #157 background imageLoading...
Page #157 background image
Troubleshooting and routine maintenance
141
C
Out of Memory The machine’s memory is full. Fax sending or copy operation in progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See Out
of memory message on page 47 or
page 92.)
Print operation in process
Do one of the following:
Reduce print resolution. (See Advanced tab
in the Software Users Guide on the
CD-ROM.)
Clear the faxes from the memory. (See Out
of memory message on page 92.)
Print Unable XX The machine has a
mechanical problem.
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for approximately 60
hours without losing faxes stored in the
memory. See Transferring your faxes or Fax
Journal report on page 144.)
Protected Device The protect switch of the USB
Flash memory drive is on.
Turn off the protect switch of the USB Flash
memory drive.
Rename the File There is already a file on the
USB Flash memory drive with
the same name as the file you
are trying to save.
Change the file name of the file on the USB
Flash memory drive or the file you are trying to
save.
Replace Parts
Drum
The drum unit is the end of its
life.
Replace the drum unit.
(See Replacing the drum unit on page 164.)
The drum unit counter was not
reset when a new drum was
installed.
1 Open the front cover, and then press
Clear/Back.
2 Press 1 to reset.
Replace Parts
Fuser Unit
It is time to replace the fuser
unit.
Call Brother Customer Service to replace the
fuser unit.
1-877-BROTHER (1-877-276-8437) (in U.S.A)
1-877-BROTHER (in Canada)
Error Message Cause Action

Table of Contents

Other manuals for Brother MFC-8480DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-8480DN and is the answer not in the manual?

Brother MFC-8480DN Specifications

General IconGeneral
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Print speed (black, normal quality, A4/US Letter)32 ppm
Grayscale levels256
Input color depth48 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Copier resize25 - 400 %
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)32 cpm
FaxingMono faxing
Fax memory600 pages
Modem speed33.6 Kbit/s
Power supply typeAC
Weight (imperial)40.3 lbs
Dimensions (WxDxH)530.8 x 449.5 x 474.9 mm
Power requirements110 - 240V, 50/60 Hz
All-in-one functionsCopy, Fax, Scan
Standard media sizes2.75'' - 8.5\
Maximum internal memory0.576 GB
Color all-in-one functionsscan, n
Compatible operating systemsWindows OS Mac OS
Package dimensions (W x D x H)24.7 x 22.3 x 22.6 \
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
DisplayLCD
Market positioningBusiness
Internal memory64 MB
Sound pressure level (copying)56 dB
Sound pressure level (printing)30 dB
Maximum print size216 x 356 mm
Paper tray media typesBond paper, Envelopes, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA, LLMNR, LPR/LPD, IPP/IPPS, FTP, HTTP/HTTPS, SSL/TLS, TFTP, SMTP, APOP, POP, SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD, CIFS, SNTP, NDP, RA, DNS, mDNS, ICMPv6
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Power consumption (standby)18 W
Power consumption (average operating)680 W
Package weight21645 g
Sustainability certificatesENERGY STAR
Maximum duty cycle30000 pages per month
Recommended duty cycle3500 pages per month
Operating temperature (T-T)10 - 32.2 °C
Operating relative humidity (H-H)20 - 80 %

Related product manuals