EasyManuals Logo

Brother MFC-8480DN User Manual

Brother MFC-8480DN
241 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
Sending a fax
45
5
Dual access 5
You can dial a number, and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Start to send the pages scanned so
far, or press Stop/Exit to cancel the
operation.
Real Time Transmission 5
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialing and
sending.
If the memory is full, the machine will send the
document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending in real time for all faxes 5
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a On
b Off
Select ab or OK
c Press a or b to choose On.
Press OK.
Sending in real time for the next fax
only 5
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 5.
22.Setup Send
5.Real Time TX
a On
b Off
Select ab or OK
c Press a or b to choose Next Fax:On.
Press OK.

Table of Contents

Other manuals for Brother MFC-8480DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-8480DN and is the answer not in the manual?

Brother MFC-8480DN Specifications

General IconGeneral
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Print speed (black, normal quality, A4/US Letter)32 ppm
Grayscale levels256
Input color depth48 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Copier resize25 - 400 %
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)32 cpm
FaxingMono faxing
Fax memory600 pages
Modem speed33.6 Kbit/s
Power supply typeAC
Weight (imperial)40.3 lbs
Dimensions (WxDxH)530.8 x 449.5 x 474.9 mm
Power requirements110 - 240V, 50/60 Hz
All-in-one functionsCopy, Fax, Scan
Standard media sizes2.75'' - 8.5\
Maximum internal memory0.576 GB
Color all-in-one functionsscan, n
Compatible operating systemsWindows OS Mac OS
Package dimensions (W x D x H)24.7 x 22.3 x 22.6 \
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
DisplayLCD
Market positioningBusiness
Internal memory64 MB
Sound pressure level (copying)56 dB
Sound pressure level (printing)30 dB
Maximum print size216 x 356 mm
Paper tray media typesBond paper, Envelopes, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA, LLMNR, LPR/LPD, IPP/IPPS, FTP, HTTP/HTTPS, SSL/TLS, TFTP, SMTP, APOP, POP, SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD, CIFS, SNTP, NDP, RA, DNS, mDNS, ICMPv6
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Power consumption (standby)18 W
Power consumption (average operating)680 W
Package weight21645 g
Sustainability certificatesENERGY STAR
Maximum duty cycle30000 pages per month
Recommended duty cycle3500 pages per month
Operating temperature (T-T)10 - 32.2 °C
Operating relative humidity (H-H)20 - 80 %

Related product manuals