Brother MFC-8810DW - User Manual

Other manuals for Brother MFC-8810DW

Service Manual373 pages

Quick Setup Guide44 pages

Manual12 pages

Product Safety Guide22 pages

Questions and Answers:

J
Jonathan WrightSep 2, 2025
What to do if my Brother All in One Printer says 'Jam Inside'?
- J
  John LopezSep 2, 2025
  If your Brother All in One Printer displays 'Jam Inside', it indicates that paper is jammed inside the machine or the toner cartridge is placed in the machine without the drum unit. If paper is jammed, refer to the manual section 'Paper is jammed inside the machine'. If the toner cartridge is missing the drum unit, put the toner cartridge into the drum unit, and then re-install the drum unit and toner cartridge assembly in the machine.
J
Joanna SmithSep 3, 2025
How to fix 'Drum Error' on my Brother All in One Printer?
- S
  Scott JonesSep 3, 2025
  If your Brother All in One Printer displays 'Drum Error', it means the corona wire on the drum unit needs cleaning, or the toner cartridge is placed in the machine without the drum unit. Clean the corona wire on the drum unit. If the toner cartridge is missing, put the toner cartridge into the drum unit, and then re-install the drum unit and toner cartridge assembly in the machine.
R
richard48Sep 4, 2025
Why am I getting error messages using the Brother Software Scan to FTP feature?
- A
  Ann RiceSep 4, 2025
  If you receive error messages using the Brother Software Scan to FTP feature, it could be due to several reasons. First, verify the FTP server's IP address or the DNS server address. If the issue persists, double-check your username and password for the FTP server. Another potential cause is an incorrect destination folder setting on the FTP server. Lastly, it may be due to a lack of access rights. If this is the case, contact your network administrator.
A
Andrew BranchSep 5, 2025
Why does my Brother Software show 'Authenticate Err Wrong Date&Time'?
- A
  Anna ByrdSep 5, 2025
  If you're encountering an 'Authenticate Err Wrong Date&Time' error with your Brother Software, it's likely due to incorrect date and time settings on your machine. To resolve this, use the machine's control panel to correctly set the date, time, and time zone. Ensure these settings match those of the server providing authentication.
D
Dana MurphySep 5, 2025
What to do if Brother Software shows 'Server Time out'?
- C
  Christina LambertSep 6, 2025
  If you're experiencing a 'Server Time out' error with your Brother Software, the cause might be a wrong host address. If you've used your CIFS server's IP address as the Host Address, double-check the IP address. If you've specified the DNS style, confirm the Host Address, and contact your network administrator for your DNS style address. If you've used your computer name as the Host Address, verify the computer name and contact your network administrator for the WINS server settings.
C
Chad BestSep 6, 2025
How to fix Brother Software 'Authenticate Err Sending Error'?
- I
  iwrightSep 7, 2025
  If you receive an 'Authenticate Err Sending Error' with your Brother Software, it could be due to a wrong username or password. Confirm your username and password for the CIFS server. If the username is part of the domain, ensure you include the domain name with the username, for example, user@domain or domain\user.

Brother MFC-8810DW Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 1200 dpi
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Monthly Duty Cycle	Up to 50, 000 pages
Memory	128 MB
Fax Speed	33.6 kbps
Processor	400 MHz
Connectivity	USB, Ethernet, Wi-Fi Direct
Scanning Resolution	Up to 19200 x 19200 dpi (Interpolated)
Mobile Printing	Brother iPrint&Scan, AirPrint, Google Cloud Print
Maximum Paper Size	Legal (8.5" x 14")
Print Speed	Up to 40 ppm