Brother MFC-8910DW - Page 168

160
7.Network
(MFC-8910DW)
(Continued)
2.WLAN
(Continued)
5.WLAN Status 1.Status — Active(11n)
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection Fail
You can see the
current wireless
network status.
See .
2.Signal — Strong
Medium
Weak
None
You can see the
current wireless
network signal
strength.
3.SSID — — You can see the
current SSID.
4.Comm. Mode — Ad-hoc
Infrastructure
You can see the
current
Communication
Mode.
6.MAC Address ——— Shows the MAC
address of the
machine.
7.Set to Default ——1.Reset
2.Exit
Restore the
wireless network
settings to factory
default.
8.WLAN Enable ——On
Off*
Enable or disable
the wireless LAN
manually.
3.Wi-Fi Direct 1.Push Button — — — You can easily
configure your
Wi-Fi Direct™
network settings
using the one-
button push
method.
See .
2.PIN Code — — — You can easily
configure your
Wi-Fi Direct™
network settings
using WPS with a
PIN code.
3.Manual — — — You can manually
configure your
Wi-Fi Direct™
network settings.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
Network User's Guide
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.