Brother MFC-8910DW - Page 175

Menu and features
167
C
Level 1 Level 2 Level 3 Options Descriptions Page
0.Initial Setup 1.Receive Mode — Fax Only*
Fax/Tel
External TAD
Manual
Chooses the receive
mode that best suits
your needs.
29
2.Date&Time 1.Date&Time — Puts the date and
time on the LCD and
in headings of faxes
you send.
See .
2.Daylight Save On
Off
Changes for Daylight
Saving Time
automatically.
See .
3.Time Zone UTCXXX:XX Sets the time zone
for your country.
See .
3.Station ID — Fax:
Tel:
Name:
Sets your name and
fax number to appear
on each page you
fax.
See .
4.Tone/Pulse
(Not available in New
Zealand)
— Tone*
Pulse
Chooses the dialling
mode.
4.Dial Tone
(in New Zealand)
5.Dial Tone
(except New
Zealand)
— Detection
No Detection*
You can shorten the
dial tone detect
pause.
124
5.Dial Prefix
(in New Zealand)
6.Dial Prefix
(except New
Zealand)
— — Sets a prefix number
that will always be
added before the fax
number every time
you dial.
See .
6.Reset
(in New Zealand)
7.Reset
(except New
Zealand)
1.Network 1.Reset
2.Exit
Restores all network
settings to the factory
defaults.
132
2.Address & Fax 1.Reset
2.Exit
Restores all stored
phone numbers and
fax settings.
3.All Settings 1.Reset
2.Exit
Restores all the
machine settings to
factory default.
Advanced User's Guide
Quick Setup Guide
Network User's Guide
The factory settings are shown in Bold with an asterisk.