Brother MFC-J2730DW Quick Setup Guide

NOTE
• MostoftheillustrationsinthisQuickSetupGuideshowthe
MFC-J5730DW.
• Saveallpackingmaterialsandtheboxincaseforanyreasonyou
mustshipyourmachine.
• You must purchase the correct interface cable for the
interface you want to use. A USB cable is included with
some models.
USB cable
WerecommendusingaUSB2.0cable(TypeA/B)thatisnomore
than5metreslong.
Ethernet (Network) cable
Useastraight-throughCategory5(orgreater)twisted-paircable
for10BASE-Tor100BASE-TXFastEthernetNetwork.
2
Load plain A4 paper
Forloadingothersizesofpaper,seePaper HandlingintheReference Guide.
1
Unpack the machine and check the components
Thecomponentsincludedintheboxmaydifferdependingonyourcountry.
Pullthepapertraycompletelyoutof
themachineasshownbythearrow.
Takeoffthetraytopcover.
Fanthepaperwell.
Connectthetelephonelinecord.
UsethesocketmarkedLINEandguide
thecordoutthebackofthemachine.
Liftthescannercover. Closethescannercover.
Whenthemachinehasfinishedtheinitialcleaning
process,followtheTouchscreeninstructionsto
configurethemachine’ssettings.
• Checkprintquality
• Congurethetraysettings
• Viewoperationtips
• SetBrotherLCDMessagedefaults
• Printtheinstallationsheet
Opentheinkcartridgecover,andthen
removetheorangeprotectivepart
fromthemachine.
Afterturningthemachineon,youmayneedtosetyour
countryorlanguage(dependingonyourmachine).
Ifrequired,followtheTouchscreeninstructions.
Loadthepaperinthetray.
Adjustthepaperguides.
Donotexceedthis
mark(bbb).
NOTE
Ifyouaresharingonetelephonelinewithanexternal
telephone,connectitasshownbelow.
Connectthepowercord.Themachinewill
poweronautomatically.
NOTE
Youcanadjustthecontrolpanelangletoread
theTouchscreenmoreeasily.
NOTE
FollowtheTouchscreeninstructionstostore
theorangeprotectivepartinsidethemachine.
Ifyoumusttransportthemachine,remove
theinkcartridgesandreplacethispart.
Pulloutthepapersupport
untilitlocksintoplace.
Putonthetraytopcover,and
thenslowlypushthepapertray
completelyintothemachine.
a. Extensiontelephone
b. Externaltelephone
QuickSetupGuide
MFC-J2730DW / MFC-J5730DW / MFC-J5930DW
ReadtheProduct Safety Guidefirst,thenreadthisQuick Setup Guide
forthecorrectinstallationprocedure.
3
Connect the power cord
6
Install the inbox ink cartridges
4
Select your country
or language
(Initial setup only)
7
Machine settings
D00FFN001-00
UK
Version0
(for UK) (for others)
Inbox Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Reference Guide
Product Safety Guide
Brother
Installation Disc
Telephone Line Cord
Maintenance Sheet Power Cord
1. Press [Settings]>[All Settings]>
[Initial Setup]>[Local Language].
2. Pressyourlanguage.
3. Press .
8
Select your language
(if needed and only for
certain models)
9
Connect the telephone line cord
Ifyouarenotusingyourmachineasafax,goto
10
.
ThelatestmanualsareavailableattheBrotherSolutionsCenter:
solutions.brother.com/manuals
WatchourFAQvideosforhelp
withsettingupyourBrother
machine.
solutions.brother.com/videos
5
Set the date and time
FollowtheTouchscreeninstructionstosetthedate
andtime.
FollowtheTouchscreeninstructionstounpackandinstalltheinkcartridges.
Themachinewillpreparetheinktubesystemforprinting.
Quicklyshakejusttheblack
inkcartridgehorizontally
15timesasshown,before
insertingitintothemachine.
(Example for UK)
(Example for UK)
1
2

Brother MFC-J2730DW Specifications

General

Brand	Brother
Model	MFC-J2730DW
Category	All in One Printer
Language	English