2
a Remove the protective tape and film covering
the machine, and also from the LCD.
b Remove the plastic bag containing the ink
cartridges from on top of the paper tray.
c Make sure you have all components.
2
Load plain A4 paper
a Pull the paper tray a completely out of the
machine.
b Lift the output paper tray cover a.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• Please use the supplied USB cable for a USB
connection.
USB cable
Please make sure you use a USB 2.0 cable
(Type A/B) that is no more than 2 metres long.
1
1
3
2
3
1
To Next Page
Loading...
