To Next Page
C
Cory BergerSep 23, 2025
What does 'Not Registered' mean on my Brother MFC-J450DW All in One Printer?
- MMichael JacobsonSep 23, 2025
You tried to access a Speed Dial number that hasn't been stored. Set up the Speed Dial number.
What does 'Not Registered' mean on my Brother MFC-J450DW All in One Printer?
You tried to access a Speed Dial number that hasn't been stored. Set up the Speed Dial number.
Why is my Brother All in One Printer showing 'Document Jam'?
The document wasn't inserted or fed correctly, or the document scanned from the ADF was too long.
Why does my Brother All in One Printer say 'Ink low'?
One or more ink cartridges are near the end of their life. Order a new ink cartridge. You can continue printing until the LCD shows 'Cannot Print'.
What to do if the Brother MFC-J450DW says 'Cover is Open'?
If the scanner cover isn't securely closed, lift it and close it again. Also, make sure the ink cartridge cover is firmly closed until it locks into place.
Why does my Brother MFC-J450DW say 'Out of Memory'?
The printer's memory is full. If you're sending a fax or copying, press Stop/Exit and wait for other processes to finish before trying again. Alternatively, press Black Start or Color Start to send or partially print the scanned pages. You can also clear the memory or disable Memory Receive. Printing faxes from the memory can also help.
What does 'DR Mode in Use' mean on my Brother All in One Printer?
The machine is in Distinctive Ring mode. Set Distinctive Ring to Off.
Why does my Brother MFC-J450DW say 'Cannot Detect' ink cartridge?
You installed a new ink cartridge too quickly, and the machine didn't detect it. Take out the new ink cartridge and re-install it slowly and firmly until it latches. If you are not using Genuine Brother Innobella™ ink, use a new Genuine Brother Innobella™ Ink Cartridge. If the error is not cleared, call Brother Customer Service.
What does 'Cannot Detect Ink' mean on my Brother MFC-J450DW?
If you are not using Genuine Brother Innobella™ ink, the machine may not detect the ink volume. Use a new Genuine Brother Innobella™ Ink Cartridge. If the error is not cleared, call Brother Customer Service.
What does 'Low Temperature' mean on my Brother MFC-J450DW All in One Printer when it displays the error?
The room temperature is too low. Warm the room and allow the machine to warm up to room temperature before trying again.
What does 'Ink Absorber Full' mean on my Brother MFC-J450DW?
The ink absorber box or flushing box is full. The ink absorber box or flushing box will need to be replaced.
General| Print Technology | Inkjet |
|---|---|
| Max Print Speed (Color) | 27 ppm |
| Display | 1.8" Color LCD |
| Duplex Printing | Yes |
| Paper Input Capacity | 100 sheets |
| Functions | Print, Copy, Scan, Fax |
| Mobile Printing | AirPrint, Google Cloud Print, Brother iPrint&Scan |
| Memory | 64 MB |
| Connectivity | USB, Ethernet, Wi-Fi |
| Automatic Document Feeder | Yes |
| Scanner Type | Flatbed |
| Max Print Resolution | 6000 x 1200 dpi |
Step-by-step guide on sending a fax from the machine.
Step-by-step guide for replacing ink cartridges.
How to clean the print head to improve print quality.
Table of common error messages and their solutions.
Steps to resolve issues when the machine does not print.
Solutions for paper not feeding or feeding multiple pages.
Troubleshooting dial tone and connection problems.
Minimizing fax errors due to line interference or VoIP.
Requirements for Windows and Macintosh operating systems and software.
