Brother MFC-J450DW User Manual

92
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c Press a or b to choose Serial No.
Press OK.
Your machine’s serial number will
appear on the LCD.
d Press Stop/Exit.
Checking the firmware
version B
You can see the machine’s firmware version
on the LCD.
a Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c Press a or b to choose Version.
Press OK.
Your machine’s firmware version will
appear on the LCD.
d Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Machine Reset
You can reset all the machine’s settings
that you have changed, such as Date and
Time and Ring Delay.
2 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
3 Address&Fax
Address & Fax resets the following
settings:
 Speed Dial
(Speed-Dial and Setup Groups)
 Station ID
(Name and Number)
 Report settings
(Transmission Verification Report,
Speed Dial and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
4 All Settings
You can restore all settings to the factory
setting.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.

Brother MFC-J450DW Specifications

General

Print Technology	Inkjet
Max Print Speed (Color)	27 ppm
Display	1.8" Color LCD
Duplex Printing	Yes
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Mobile Printing	AirPrint, Google Cloud Print, Brother iPrint&Scan
Memory	64 MB
Connectivity	USB, Ethernet, Wi-Fi
Automatic Document Feeder	Yes
Scanner Type	Flatbed
Max Print Resolution	6000 x 1200 dpi