Brother MFC-J450DW - Basic Operations

General information
9
1
Basic Operations 1
The following steps show how to change a
setting in the machine. In this example, the
Receive Mode setting is changed from
Fax Only to Fax/Tel.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Receive Mode.
Press OK.
e Press a or b to choose Fax/Tel.
Press OK.
You can see the current setting on the
LCD:
NOTE
Press Clear if you want to go back to the
previous level.
f Press Stop/Exit.