24
4
How to send a fax 4
The following steps show how to send a fax.
a Do one of the following to load your
document:
Place the document face down in the
ADF. (See Using the ADF
on page 21.)
Load your document face down on
the scanner glass. (See Using the
scanner glass on page 22.)
• To send color faxes with multiple pages,
use the ADF.
• If you send a black & white fax from the
ADF while the memory is full, it will be sent
in real time.
• You can use the scanner glass to fax
pages of a book one at a time. The
document can be up to Letter or A4 size.
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple-page document.
b Press (FAX).
The LCD shows:
c You can change the following
fax-sending settings. Press a or b to
scroll through the fax settings. When the
setting you want is displayed, press OK
and choose your option.
(Basic User’s Guide)
For information about changing the
following fax-sending settings, see
pages 25 to 26.
Glass Scan Size
Color Fax Transmission
Transmission Verification Report
(Setup)
(Advanced User’s Guide)
For more advanced fax-sending
operations and settings
(See Advanced User’s Guide: Sending
a fax (MFC models).)
Contrast
Fax Resolution
Set New Defaults
Factory Reset
Faxing at the end of a call
Broadcasting
Real Time Transmission
Overseas Mode
Canceling Waiting Jobs
d Enter the fax number.
Using the dial pad
Using the Address Book
Address Book
Using call history
Outgoing Call
Caller ID hist.
Sending a fax 4
To Next Page
Loading...
Need help?
General
