21
3
3
How to load
documents
3
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF 3
The ADF can hold up to 20 pages and feeds
each sheet individually. Use paper that is
within the sizes and weights shown in the
table. Always fan the pages before placing
them in the ADF.
Document Sizes and Weights 3
How to load documents 3
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or correction
fluid are completely dry.
a Unfold the ADF Document Support (1).
b Fan the pages well.
c Adjust the paper guides (1) to fit the
width of your document.
d Place your document, face down, top
edge first in the ADF underneath the
guides until the screen shows
ADF Ready. and you feel it touch the
feed rollers.
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Loading documents 3
Length: 5.8 to 14 in.
(148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Weight: 17 to 24 lb
(64 to 90 g/m
2
)
To Next Page
Loading...
Need help?
General
