12
(MFC-J6530DW/J6535DW/J6730DW/J6930DW/J6935DW)
DO NOT remove or damage any of the caution or warning labels inside the product.
• Disruption of power can wipe out information in the product’s memory.
• If the product does not operate normally when the operating instructions are followed, adjust
only those controls that are covered by the operating instructions. Incorrect adjustment of other
controls may result in damage and will often require extensive work by a qualified technician
to restore the product to normal operation.
• A distinct change in the product’s performance may indicate a need for service.
• DO NOT connect your product to an AC power outlet controlled by wall switches, automatic
timers or to the same circuit as a large appliance, such as an air conditioner, copier, shredder,
or other equipment that requires a significant amount of electricity to operate. Operating this
product in conjunction with the other product(s) could create an overvoltage, tripping your
circuit breaker or blowing your fuse; or might disrupt the power supply. Disruption of the power
supply may delete information from the product’s memory and repeated cycling of the power
supply can damage the product.
• We recommend that you use our genuine ink cartridges to replace the cartridge that comes
with the device. Non-genuine ink cartridges may cause damage to the print head. They may
also result in differences in the colors or storage stability. (Not all non-genuine ink cartridges
cause these issues.)
Important safety instructions 1
DO NOT attempt to service this product yourself because opening or removing covers may
expose you to dangerous voltage points and other risks and may void your warranty. Refer all
servicing to a Brother Authorized Service Center. For the location of your nearest Brother
Authorized Service Center, please contact:
In USA: 1-877-BROTHER (1-877-276-8437)
In Canada: www.brother.ca/support
To Next Page
Loading...
Need help?
General
Weight and Dimensions
