EasyManua.ls Logo

Brother MFC-J6710DW - User Manual

Brother MFC-J6710DW
246 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
Users Guide
Users Guide
PANTONE2728
Advanced User’s Guide
Safety and Legal
Basic User’s Guide

Table of Contents

Other manuals for Brother MFC-J6710DW

Questions and Answers

  • A
    Ashley LopezSep 23, 2025
    How to fix paper width sensor positioning failure Brother MFC-J6710DW?
    • B
      Betty JohnsonSep 23, 2025
      If you are experiencing paper width sensor positioning failure with your Brother All in One Printer, reposition the paper width sensor.
  • L
    leechristopherAug 23, 2025
    How to fix Brother MFC-J6710DW All in One Printer when it prints B&W only and says 'Replace Ink'?
    • C
      clarence11Aug 23, 2025
      If your Brother All in One Printer only prints in black and white and prompts you to replace the ink, it indicates that one or more of the color ink cartridges have reached the end of their life. To resolve this, replace the ink cartridges.
  • J
    James VelezAug 25, 2025
    Why can't my Brother All in One Printer print or scan over the network?
    • W
      William BoothAug 26, 2025
      If your Brother All in One Printer is unable to print or scan over the network, there are several potential causes. First, check if you are using security software that may be blocking the connection. Also, verify that your Brother machine has been assigned an available IP address and that both the IP address and Subnet Mask of your computer and the Brother machine are correct and located on the same network. You can use the Network Connection Repair Tool to fix the Brother machine's network settings. If a previous printing job failed, delete it from your computer's print queue. If you are using a wireless connection, print the WLAN Report to confirm the status of the wireless connection. If the issue persists, uninstall and reinstall the MFL-Pro Suite.
  • G
    gnewmanAug 27, 2025
    What to do if Brother All in One Printer is not found on network during MFL-Pro Suite installation?
    • G
      Gina ThompsonAug 27, 2025
      If your Brother All in One Printer is not found on the network during the MFL-Pro Suite installation, check the following: If you're using security software, confirm your settings on the installer dialog and allow access when the alert message of the security software appears. Ensure that your Brother machine is within about 3.3 feet (1 meter) of the WLAN access point/router when configuring wireless network settings. Remove any obstructions like walls or furniture between your machine and the WLAN access point/router. Also, move any wireless computers, Bluetooth devices, microwave ovens, or digital cordless phones away from the Brother machine and the WLAN access point/router.
  • C
    Corey GutierrezAug 27, 2025
    What to do if my Brother MFC-J6710DW says black ink cartridge not loaded?
    • G
      gonzaleznicoleAug 27, 2025
      If your Brother All in One Printer indicates that a black ink cartridge is not loaded, this is detected by the ink cartridge detection sensor. To resolve this, load the black ink cartridge.
  • J
    jamesdebbieSep 17, 2025
    How to fix Brother All in One Printer that cannot detect the origin of the carriage?
    • S
      ssaundersSep 17, 2025
      If your Brother All in One Printer cannot detect the origin of the carriage, detected by the CR encoder, reset the carriage assembly.
  • J
    Joshua WilsonSep 14, 2025
    What are the security software settings for Brother MFC-J6710DW?
    • K
      kirbyelizabethSep 14, 2025
      If you're using security software with your Brother All in One Printer, ensure you accepted the security alert dialog during the MFL-Pro Suite or BRAdmin Light installation, or when using the printing/scanning features. If you did not accept the dialog, the firewall function of your security software may be rejecting access. The following port numbers are used for Brother network features: Network scanning (Port 54925 / Protocol UDP), PC-FAX RX (Port 54926 / Protocol UDP), Network scanning/printing, PC-FAX RX, Remote Setup (Port 137 / Protocol UDP), and BRAdmin Light (Port 161 / Protocol UDP).
  • C
    coltonadamsSep 15, 2025
    What to do if Brother MFC-J6710DW failed to detect the leading edge of recording paper?
    • M
      Michael WhiteSep 15, 2025
      If your Brother All in One Printer fails to detect the leading edge of recording paper, clean the sensor and check for paper jams.
  • M
    Meagan KeithSep 6, 2025
    Why Brother MFC-J6710DW All in One Printer cannot identify cyan ink cartridge?
    • B
      baileywareSep 6, 2025
      If your Brother All in One Printer cannot identify a cyan ink cartridge, it could be that the sensing timing of the ink remaining sensor, ink cartridge detection sensor, and high-yield ink cartridge sensor is off. Try replacing the cyan ink cartridge.
  • K
    Karen BarnettSep 3, 2025
    Why Brother MFC-J6710DW All in One Printer cannot identify magenta ink cartridge?
    • C
      Crystal HarrisSep 3, 2025
      If your Brother All in One Printer cannot identify a magenta ink cartridge, it might be because the sensing timing of the ink remaining sensor, ink cartridge detection sensor, and high-yield ink cartridge sensor is off. Replacing the magenta ink cartridge may resolve this issue.

Brother MFC-J6710DW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Economical printingYes
Duplex printing modeAuto
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle- pages per month
Number of print cartridges4
Scan toE-mail, E-mail Server, File, FTP, Image, OCR, USB
Scanner typeFlatbed & ADF scanner
Grayscale levels256
Input color depth48 bit
Maximum scan areaA3 (297 x 420) mm
Output color depth24 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution2400 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory400 pages
Modem speed33.6 Kbit/s
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Fax resolution (black)203 x 392 DPI
Fax speed dialing (max numbers)100
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity50 sheets
Maximum input capacity500 sheets
Total number of input trays2
Auto document feeder (ADF) input capacity35 sheets
DisplayLCD
Product colorBlack
Display diagonal3.3 \
Market positioningBusiness
Processor familyRISC
Compatible memory cardsMemory Stick (MS), MS PRO, MS PRO Duo, SD, SDHC
Sound pressure level (printing)50 dB
Photo paper sizes9x13, 10x15, 13x18, 20x25 cm
Custom media width148 - 297 mm
Maximum print size297 x 432 mm
Custom media length148 - 431.8 mm
Paper tray media typesBond paper, Glossy paper, Photo paper, Plain paper, Recycled paper, Transparencies
Paper tray media weight64 - 220 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A3, A4, A5, A6
Photo paper sizes (imperial)4x6, 5x7, 5x8, 8x10, 10x15 \
Borderless printing media sizesA3, A4, A6, B4
Maximum ISO A-series paper sizeA3
Auto Document Feeder (ADF) media weight64 - 90 g/m²
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms128-bit WEP, 64-bit WEP, SSID, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK
Mobile printing technologies-
Standard interfacesEthernet, USB 2.0, Wireless LAN
USB 2.0 ports quantity1
Scan speed3.49 sec/page
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, fax, print, scan
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)7.5 W
Power consumption (PowerSave)4 W
Power consumption (average operating)26 W
Package weight25.000 g
Sustainability certificatesENERGY STAR
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Bundled softwareBrother MFL-Pro Suite\\r Brother ControlCentre4 (Win)\\r Nuance® Paperport® 12 SE + OCR (Win)\\r Reallusion® FaceFilter Studio (Win8)\\r Brother ControlCentre2 (Mac)\\r NewSoft® Presto!® PageManager9 (Mac)
Weight and Dimensions IconWeight and Dimensions
Depth489 mm
Width540 mm
Height331 mm

Related product manuals