64
Cleaning the paper pick- up
rollers for paper tray #2
(MFC-J6710DW only) A
a Unplug the machine from the electrical
socket. Pull tray #2 completely out of the
machine.
If the paper support flap is open, close it,
and then close the paper support.
b Clean the paper pick-up rollers for
tray #2 (1) with a soft lint-free cloth
moistened with water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
c Put tray #2 firmly back in the machine.
d Re-connect the power cord.
Checking the ink volume A
Although an ink volume icon appears on the
LCD, you can use the Menu key to see a
large graph showing the ink that is left in each
cartridge.
a Press Menu.
b Press a or b to choose
Ink Management.
Press OK.
c Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
d Press Stop/Exit.
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh in the
Software User’s Guide.)
To Next Page
Loading...
