Brother MFC-J6710DW - Secure Paper Feed Mode for A3 Size Short Grain Paper; Tray Use in Fax Mode (MFC-J6710 DW Only)

Chapter 2
24
Tray use in Fax mode
(MFC-J6710DW only) 2
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
 Tray #2 is set to a different paper size that
is more suitable for the received faxes.
 Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a Press Tray Setting.
b Press a or b to choose Tray Use:Fax.
c Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d Press a or b to choose Complete.
Press OK.
Secure Paper Feed mode for
A3 size Short Grain Paper 2
If your prints have horizontal lines when using
A3 paper, your paper may be long grain
paper. Set A3 - Short Grain to Off to
avoid this problem.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
A3 - Short Grain.
d Press d or c to choose Off.
Press OK.
e Press Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or manufacturer for paper
specifications.
• Printing will be slower when using the
A3 - Short Grain setting On.