Brother MFC-J6710DW - Changing to the Public Mode; Switching Users; Turning Secure Function Lock On;Off

Chapter 2
6
d Uncheck the functions that you want to
restrict in the Print box or the Others
box. If you want to configure the
maximum page count, check the On box
in Page Limit, and then enter the
number in the Max. box. Then click
Submit.
Note
• You cannot use the same password as
another user’s password.
• You can set up one Public user. Public
users do not need to enter a password.
For more information, see the Network
User's Guide.
Turning Secure Function
Lock on/off 2
Note
If you enter the wrong password, the LCD
will show Wrong Password. Enter the
correct password.
Turning Secure Function Lock on 2
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Lock OffiOn.
Press OK.
e Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off 2
a Press Menu.
b Press a or b to choose Lock OniOff.
Press OK.
c Enter your four-digit administrator
password.
Press OK.
Switching users 2
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
a Hold down Shift as you press l.
Or, press Menu. Then press a or b to
choose Change User and press OK.
b Press a or b to choose your user name.
Press OK.
c Enter your four-digit user password.
Press OK.
Changing to the Public mode 2
a Press Menu.
b Press a or b to choose Go to Public.
Press OK.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting. (See Mode Timer
on page 3.)